|
Post by stardragon1963 on Jul 21, 2012 14:37:38 GMT -6
New 454 rider. bought a ike that needs a new shifter lever, starter and a signal. Got the starter on ok replaced the spindle and trhe starter chain. Got the new gasket on ok but here is my problem now that I took it all apart. when I put it back together I am unable to get the sgifter lever righ with the linkage. I can hit neutral and 1st but nothing else and the linkage is very sloppy. Any ideas what I am not doing right lol.
The clutch engaes corectly when I pull it in to allow me to move the bike in gear and locks fine when out. i know it shifted fine before I took it apart so it has to be something I do not have right.
thanks for any help.
|
|
|
Post by eaglerider on Jul 21, 2012 17:08:30 GMT -6
When the side cover, shifter and all get removed, it is pretty easy to get the linkage out of adjustment when putting it all back together. U will have to go thru the adjustment procedures all over again, to get everything adjusted right. The manual has the directions in it on how to do it. We do have an on-line manual that u can read up on the adjustment procedures.
|
|
|
Post by stardragon1963 on Jul 21, 2012 19:51:00 GMT -6
thanks I will look it up in the manual.
|
|
|
Post by stardragon1963 on Jul 21, 2012 19:55:29 GMT -6
I have looked and searched for the online manual do you have a link to it?
thanks again.
|
|
|
Post by eaglerider on Jul 21, 2012 21:39:46 GMT -6
|
|