|
|
Post by TheBrown57 on Mar 2, 2011 5:56:36 GMT -6
Ok so yesterday I took off my carbs an stock air box preping for my pod filters to get here an Im wonder what I do with these 2 tubes Do I need to put a air filter on this or just leave it go?  I know that I need a air filter on it Im just wondering how I mount it I read on here to save this crocked hose so what now   |
|
|
|
Post by Blaine on Mar 2, 2011 6:12:03 GMT -6
I cut the top of the hose off,and just pushed the filter on.this way the filter is standing straight up.The other hoses can be eliminated & blocked off
|
|
|
|
Post by TheBrown57 on Mar 2, 2011 18:44:32 GMT -6
Now when you say capped am I removing this metal thing that the tubes are conveyed to an capping it off on the engine?  |
|
|
|
Post by Blaine on Mar 2, 2011 19:40:19 GMT -6
Yes.Mine has plates that bolt to the valve cover,eliminating everything.But you can block it as close to the valve cover as you want.   |
|
|
|
Post by TheBrown57 on Mar 2, 2011 19:56:00 GMT -6
Also exactly where do I tee the hose that goes hear too?  |
|
|
|
Post by Blaine on Mar 2, 2011 21:13:08 GMT -6
You can block that vacuum port off.The one on the other side can go directly to vacuum on the petcock.Or you can tee both vacuum ports into one,than to the petcock.Your choice.  |
|
|
|
Post by TheBrown57 on Mar 2, 2011 21:54:30 GMT -6
Also what is the purpose of the tube in the middle the clear one that can move? Also thanks for all this help ive been doing this in real time I'm just happy I have an iPhone an a photo bucket account an it takes a darn good camera
|
|
|
|
Post by Blaine on Mar 2, 2011 22:16:33 GMT -6
Also what is the purpose of the tube in the middle the clear one that can move? Also thanks for all this help ive been doing this in real time I'm just happy I have an iPhone an a photo bucket account an it takes a darn good camera The clear hose a vent for the carbs and must remain open.If it gets blocked or kinked the bike will bog every time you hit the throttle. |
|
|
|
Post by TheBrown57 on Mar 3, 2011 6:16:03 GMT -6
Thanks again for all this help I was completely lost trying to read the guide posted on Suaves site im currently at work an also awaiting float bowl seals an the pod filters but I cant wait to get em an get this thing back up an running  |
|
|
|
Post by Blaine on Mar 3, 2011 6:39:58 GMT -6
Thanks again for all this help I was completely lost trying to read the guide posted on Suaves site im currently at work an also awaiting float bowl seals an the pod filters but I cant wait to get em an get this thing back up an running Be prepared to do some tweaking to get the bike to run properly when you install your pod filters.If you check my other postsunder "Carb re jetting questions" you will find information and pics on restricting the air flow in the filters,and re jetting the carbs.Good luck! |
|
