|
Post by moosinatrix on Oct 5, 2013 21:40:57 GMT -6
Can you weigh it?
|
|
|
Post by eaglerider on Oct 6, 2013 4:22:13 GMT -6
it is still in the frame, but shipping would be costly...cannot send it thru post office.
|
|
|
Post by moosinatrix on Oct 9, 2013 10:59:28 GMT -6
yeah I would be interested in that bottom end man but I don't know when I'd be able to get it that is a little over 300 miles one way. What are, chance of meeting midway pour flexing on, price. I could give you my bottom end for parts if you need. How far is Livingston from San Antonio? I have the bottom half of an engine with good chain, etc, no starter, flywheel, etc. You could put your jugs, head, and other parts from your engine on it....come get it for $100.00. Let me know if you want it, so I can remove it from the frame.
|
|
|
Post by eaglerider on Oct 9, 2013 13:53:52 GMT -6
U would need the stator cover, flywheel, starter clutch off your bottom end. I'm on Social Security, so my funds are pretty limited...would be kinda difficult for my traveling much. Wouldn't really need the rest of your bottom end...maybe someone else might need some parts.
|
|
|
Post by moosinatrix on Oct 11, 2013 8:55:11 GMT -6
Can you post pics please
|
|
|
Post by moosinatrix on Oct 11, 2013 9:26:37 GMT -6
Btw I have some parts for sale but I don't get the new thread Button when I use my phone but it is All I have atm.
I have, the front badge with bolts
Complete working headlight, bucket, brackets, and hardware
Original handlebars
Also does anyone know of any 3 wire speed sensors that will fit this bike, I have a Speedo from a Buell blast that has the dummy lights built into it that I wanna use with a custom tach just to clean up the front end of of the bike.
Also if any has done a mod to their bike so they can remove the back rest, I would like to know how, you did it. I Wanna get rid of the back rest and the brushed aluminum that runs under the seat. Ty again guys
|
|
|
Post by eaglerider on Oct 11, 2013 15:20:18 GMT -6
What pics do you mean? The lower end would look like yours, except the cam chain is intact, and the pistons are included.
|
|
|
wont start
Oct 13, 2013 13:53:18 GMT -6
via mobile
Post by moosinatrix on Oct 13, 2013 13:53:18 GMT -6
I understand that I just wanted to see it
|
|
|
Post by eaglerider on Oct 13, 2013 16:51:35 GMT -6
Ok.....raining and kinda dark in the shed where it is.....will try to get a couple of pics Tuesday (baby sitting tomorrow), and get them to your email address.
|
|
|
wont start
Oct 16, 2013 11:10:13 GMT -6
via mobile
Post by moosinatrix on Oct 16, 2013 11:10:13 GMT -6
no worries hey you wouldnt be interested in stock headlight assembly would you
|
|
|
wont start
Oct 16, 2013 14:13:46 GMT -6
via mobile
Post by moosinatrix on Oct 16, 2013 14:13:46 GMT -6
Ok well I might be up there to get that motor on the next week our so can I have your number so that we can coordinate
|
|
|
Post by eaglerider on Oct 16, 2013 17:25:50 GMT -6
I'm sorry..been raining, and got tied up with some other things, & forgot to get the pics!! Will try to get those to you tomorrow. I also have to get it out of the frame.
|
|
|
wont start
Oct 23, 2013 14:54:49 GMT -6
via mobile
Post by moosinatrix on Oct 23, 2013 14:54:49 GMT -6
hey can I get your number so I can call you and we can set up and arrange a way for me pick up that motor
|
|
|
Post by eaglerider on Oct 23, 2013 16:07:57 GMT -6
Sent u a PM.....gonna try to get a couple pics and send them to your email in a few minutes.
|
|