|
|
Post by Bearded Biker on Apr 13, 2014 18:47:23 GMT -6
my sight glass on my bike is hazy on the in side. is there anything that I can put in oil that will clean glass?
|
|
|
|
Post by zekkfett on Apr 13, 2014 19:55:26 GMT -6
Unfortunately, no. It's not even really glass, it's a polycarbonate. Only way to get it clear again is the same as you would do with car headlights; it'll have to be wet sanded and polished.
Sent from my Samsung Galaxy S3 using the ProBoards Mobile App
|
|
|
|
Post by eaglerider on Apr 14, 2014 7:53:03 GMT -6
The hazy look is likely on the inside, due to dirty oil deposits. To clean it, you would have to remove the cover.
|
|
|
|
Post by zekkfett on Apr 14, 2014 9:27:31 GMT -6
The hazy look is likely on the inside, due to dirty oil deposits. To clean it, you would have to remove the cover. Oops, I guess I did forget to mention to remove the cover.  Bearded, if you get lucky, it will simply wipe off from the inside. Worst case, it's weathered on the outside and has deposits on the outside. If it's weathered on the outside, wet sand and polish should fix ya right up. |
|
|
|
Post by Bearded Biker on Apr 14, 2014 17:22:35 GMT -6
I will try cleaning from the outside. I was hoping I would not have to pull cover off.
|
|
|
|
Post by zekkfett on Apr 14, 2014 19:50:28 GMT -6
I will try cleaning from the outside. I was hoping I would not have to pull cover off. If you end up pulling the cover, might be just as cost effective to go ahead and replace the clutch while you're in there.... Sent from my Samsung Galaxy S3 using the ProBoards Mobile App |
|
|
|
Post by Bearded Biker on Apr 15, 2014 16:57:05 GMT -6
it is on the inside of the glass. that is a idea while I have the cover off.
|
|
