|
Post by eaglerider on May 14, 2015 7:20:54 GMT -6
128T 14mm pitch & 1 1/2" (40 mm).........this is the correct size belt for the 454.
|
|
|
Post by fostinator21 on May 24, 2015 12:31:23 GMT -6
Eagle, have I ever told u, Ur awesome! . I'm in the process of having a new belt put on and my mechanic says I need to change the front front drive pulley, it's too worn. My question is what other bikes can I find use a front drive pulley from? I was guessing maybe a pre95 Vulcan before they switched to chain? My other question is what signs of wear should I look out for when purchasing a used one from ebay? Would I be able to tell if it is worth buying from a picture? How many teeth is the front drive pulley?
|
|
|
Post by eaglerider on May 25, 2015 7:10:24 GMT -6
You are right about the Vulcan drive pulley. The pulley is aluminum alloy, the shaft is steel, that is one reason the pulley wears over time, and too much belt tension adds to it. If you clean the pulley and shaft good, then coat the inside spines of the pulley with heavy axle grease, it will help take up the extra loosness for a time, at least until you can locate a pulley in better condition.
|
|
|
Post by truebacon69 on Feb 1, 2016 11:33:13 GMT -6
What teeth size belt do i need for a 1990
|
|
|
Post by Blaine on Feb 1, 2016 15:42:41 GMT -6
What teeth size belt do i need for a 1990 All 454 are the same belt. (See above)
|
|
|
Post by dirtyrider on Apr 12, 2018 18:53:08 GMT -6
I can't find a front pulley except for $$$ from bike websites. Anyone have a good source?
|
|
|
Post by Blaine on Apr 13, 2018 6:05:05 GMT -6
I can't find a front pulley except for $$$ from bike websites. Anyone have a good source? Your lucky if you can get one period.......Can't here in Canada.
|
|
pya977
Junior Member
Posts: 300
|
Post by pya977 on Apr 13, 2018 11:46:18 GMT -6
part number 13144-1115 you can get a new one at www.cmsnl.comor used at www.motorsloop.comit may help that the same part number is for the en500 1990 -1996
|
|
|
Post by dirtyrider on Apr 19, 2018 16:36:49 GMT -6
Thank you.
|
|
|
Post by emagt980two on Dec 17, 2019 19:35:05 GMT -6
Hello I'm from Mexico My belt got broken yesterday So a harley guy sell me a belt with the next sizes: 126T and 1 1/2 Will that belt fix on 454 ltd? I don't want to be without my bike. Lol
|
|
|
Post by Blaine on Dec 18, 2019 7:03:06 GMT -6
Hello I'm from Mexico My belt got broken yesterday So a harley guy sell me a belt with the next sizes: 126T and 1 1/2 Will that belt fix on 454 ltd? I don't want to be without my bike. Lol No...128T......1 1/2"
|
|
|
Post by bairphilip on Mar 5, 2020 0:55:01 GMT -6
Hi everyone,
Great information here. Currently looking into potential future replacements for my drive belt. The Kawasaki OEM part is outrageously expensive, looks like you can buy the Ultima 128 tooth 1.5" 14mm belt for '93 Porky Pig softails and fatboys and it'll fit the same. Currently see that on eBay for $97 which seems very reasonable. Anyone use that belt?
I saw SummitRacing also had a belt available for around $200.
|
|
|
Post by Blaine on Mar 5, 2020 6:28:05 GMT -6
I used the Harley one...No problems at all.
|
|