|
Post by crazycoyote82 on Jul 30, 2011 13:49:05 GMT -6
The rear shocks? I googled and found that you can either use a special wrench or a hammer and screwdriver. I have tried changing it from the number 3 setting to number 5. However i cant get it to budge. Any ideas or trick/trips on changing this?
|
|
|
Post by 454rider on Jul 30, 2011 14:14:18 GMT -6
I have the tool and if you were in Florence, SC I could come over and help. lol Anyway, have you tried a large pair of pliers? I have done it with the pliers before as they have more leverage than the short tool.
|
|
|
Post by crazycoyote82 on Jul 30, 2011 14:32:25 GMT -6
Its almost like it doesnt want to turn because of the angle that the nub on the shock is. That may not make sense at all however if you look at your shock youll see what i mean. Its almost like the shock needs to move up to give clearance for the nub to seat in either the 4 or 5 position.
|
|
|
Post by Blaine on Jul 30, 2011 14:56:45 GMT -6
If they haven't been moved for a long time,it can take a lot of leverage for them to move.A little WD-40 will also help.
|
|
|
Post by crazycoyote82 on Jul 30, 2011 15:11:35 GMT -6
Thanks guys, Ill give it another shot.
|
|
|
Post by dman77720 on Jul 30, 2011 19:24:17 GMT -6
I used a pair of channel locks...and had no problems use may try this if you have a pair
|
|