|
Post by mikestorm78 on Mar 6, 2014 0:25:33 GMT -6
I know the plugs are different, but will it physically fit in the same place? The barrel ones are just ugly, I'm trying to keep the stock look as best as possible, and the oem ones are way too expensive.
Thanks,
Sent from my One using proboards
|
|
|
Post by eaglerider on Mar 6, 2014 7:50:07 GMT -6
I know the plugs are different, but will it physically fit in the same place? The barrel ones are just ugly, I'm trying to keep the stock look as best as possible, and the oem ones are way too expensive. Thanks, Sent from my One using proboards They will bolt in place, as well as the ones from a Vulcan 750, but as you said, the connectors and wiring are different. Have u looked on ebay?? Might find a 454 switch there...they are all the same.
|
|
|
Post by mikestorm78 on Mar 6, 2014 8:39:49 GMT -6
They will bolt in place, as well as the ones from a Vulcan 750, but as you said, the connectors and wiring are different. Have u looked on ebay?? Might find a 454 switch there...they are all the same. Yeah, I've looked on ebay by part number and by general search terms. The only one that has appeared in the last three weeks is going for $140 and I feel that is way too much. Apparently emgo makes an oem replacement for everything around the en450, but not for it specifically. However, if the 27005-5047 or the 27005-5052 just bolts on to our 454's, then I should be able to easily figure out the wiring. Thanks!
|
|
|
Post by Mehdehbleh on May 3, 2020 22:33:43 GMT -6
Are you sure the 27005-5047 fits?
|
|