Very chopped '85

[forjstone]

Can't seem to stop working on this thing.
Lots of changes to the rear frame, custom aluminum seat pan and tail, custom aluminum radiator cover/chin scoop, custom stainless exhaust pipes, other bits and bobs. not a whole lot of stock left really. Anyway here is we're we are at currently.
Driven daily and so much fun to drive. Still needs seat upholstery and paint obviously. Going to leave the aluminum raw and maybe make an aluminum front fairing. Not sure yet. Also with 1.5" pipes and k&n pods I'm running 145 jets and have cut out one full ring of the return spring under the carburetor caps air screws have been opened up too but can't remember how many turns.

[dutchyoungstersam]

Hey i just started modding my bike and ive been looking for a different front yoke for a while, i really like the one you used.
is there any chance you could tell me what you used and if you also chanced the fork?

thanks in advance,
Sam

[pya977]

for a simple top yoke change check out the en500. its a straight bolt on job. you will how ever need after market brackets to hold the original headlight. this i have done on my en454 also using the en500 speedo and idiot lights. check out pya977 in the mods section on the en450 forum

[dutchyoungstersam]

Thanks man but when i google en500 top yoke i cant find any that look like yours did you modify it?

[pya977]

that modded bike is not mine, his top yoke i would guess has been specialy made. the en500 top yoke to look for is 1990 model

[eaglerider]

Look in the Photo Gallery for "Eagle"...my bike, it has a 94 Vulcan 500 tripple tree, as well as custom gauges, shown in a separate pic.