kewe
New Member
Posts: 1
|
Post by kewe on Jul 19, 2020 21:41:08 GMT -6
My bike has been in storage for a couple of years but a new battery put fresh gas in and it starts up fine. over the weekend I change all the fluids, brake fluid, transmission fluid, oil, radiator and then put the battery back in and the engine light etc lights come on when I turn ignition key on but I have started nothing happens. It's shows in neutral so I don't know if I loosen the wire somewhere or if I trip something else but I don't know where to begin to troubleshoot anyone have any ideas what I should start doing first
|
|
pya977
Junior Member
Posts: 300
|
Post by pya977 on Jul 20, 2020 1:25:01 GMT -6
handle bar kill switch, sidestand switch, fuses, clutch lever switch etc. it will be somthing simple so dont panic take it one by one
|
|
|
Post by hounddog22642 on Jul 20, 2020 5:23:30 GMT -6
I had the same problem with mine. I read on one forum that the ignition is finicky, turn the key all the way right and then back to the start position, then depress the start button. You can also push the start button and wiggle the key while it is in the start position. Good luck.
|
|