|
|
Post by mattnwa on Sept 29, 2020 4:01:16 GMT -6
|
|
|
|
Post by knoizy on Sept 29, 2020 5:36:20 GMT -6
Awesome! For a couple of years I've been curious about getting into the CDI for a reflow or recap. Glad to see its not completely potted but still looks messy to get at the joints.
|
|
|
|
Post by gerbenee on Jan 11, 2021 16:26:24 GMT -6
Hi there, I'm currently working on the electrics of the ltd 454. But the PO chopped a bit to much. Do you by any chance know what wiring go where on the cdi module? I'm stuck with a cdi and a connector which is de pinned. I'm figuring out that wires go where on the connector. I know that the igniter coils have 1 common wire and 2 individual wires and the pickup coil has 4 wires and there's ground wire('s) I just don't know which one go where. Is there a chance someone can help me out with this?
|
|
|
|
Post by knoizy on Jan 11, 2021 17:25:01 GMT -6
Have you got the wiring diagram? Part of the kawasaki workshop manual - you might need a copy! Wiring diagram |
|
|
|
Post by gerbenee on Jan 12, 2021 0:52:04 GMT -6
I do have a copy of the wiring diagram same as the second post in de link you supplied. I do however use a chopped diagram from this forum. They did use the original colour/component etc.
I am also able to tell all the wires coming from the component. I just need to figure out in what order I have to fiddle them back in the original connector so I can plug that in the cdi
|
|
|
|
Post by mattnwa on Oct 22, 2022 11:41:10 GMT -6
I do have a copy of the wiring diagram same as the second post in de link you supplied. I do however use a chopped diagram from this forum. They did use the original colour/component etc. I am also able to tell all the wires coming from the component. I just need to figure out in what order I have to fiddle them back in the original connector so I can plug that in the cdi By chance could I get a copy of the Chopped diagram |
|
