mayhem
New Member
It´s a very warm winter here n Croatia :) Let´s ride!
Posts: 67
|
Post by mayhem on Feb 6, 2012 5:43:32 GMT -6
Hi, guys.
There´s a chance to get so cheap parts from Kawasaki vulcan 750, so I would like to ask if someone had any expirience with putting fork/front wheel or any other parts from that bike to 450 ltd model from 1990. Wich parts are compatible and is there a need for any kind of modification and stuff?
I wold be most thankfull for this info.
Btw, sorry about any writting mistakes, I´m not that good in english.
Once again, thanks.
|
|
mayhem
New Member
It´s a very warm winter here n Croatia :) Let´s ride!
Posts: 67
|
Post by mayhem on Feb 6, 2012 5:57:21 GMT -6
And also, I would like to ask if someone has a thermoswitsh that´s on the bottom of the radiator for sale. Thanks!
|
|
|
Post by eaglerider on Feb 12, 2012 7:36:39 GMT -6
Tripple tree, gauges (tho some little differences), forks, front wheel will fit. You can change the whole front end and the front brake system from the earlier 750 to take advantage of the better, dual front brake rotors. The tach shows a different shift point, other than that, they are the same, and the 750 has the temp gauge in the tach. The speedo is the same. Where the 454 temp gauge is, the 750 has a fuel gauge.
|
|
mayhem
New Member
It´s a very warm winter here n Croatia :) Let´s ride!
Posts: 67
|
Post by mayhem on Feb 18, 2012 2:33:36 GMT -6
Thanks for the help!
|
|
|
Post by smplinsntycstms on Mar 25, 2014 14:00:46 GMT -6
I have an 85 454ltd.....having vacuum problems, and no fuel. Can anyone help with my mass confusion? I have the clymer manual, but it's very vague on vacuum routing. There is a diag on the rear fender, but it's vague as well. I live in Arizona and have the Cali emissions.....is there any way to omit the Cali stuff and make my bike run? Any help would be GREATLY appreciated.
|
|