pya977
Junior Member
Posts: 300
|
Post by pya977 on Mar 7, 2012 14:14:41 GMT -6
if like me you have or will be lowering the rear end you will find the side stand will need to be modified. my mod is to find a side stand from a kawasaski vn1500 bonus being it is chromed. all you need to do is grind the vn1500 stand the part that fits to the frame roughly to the same as the en450, use the same bolt and spring and job done
|
|
|
Post by chopperfreak2k1 on Mar 7, 2012 15:05:57 GMT -6
NICE!! i had not considered this, thanks a ton brother!!
|
|
pya977
Junior Member
Posts: 300
|
Post by pya977 on Mar 8, 2012 14:32:55 GMT -6
forgot to add that on the bolt you will need to add a nut as there is no thread on the vn side stand
|
|