|
Post by aceonf4i on Aug 16, 2012 0:06:22 GMT -6
Hey guys I may need to jet my carbs after I put pods on them where is the best place to get them online. Also what size is stock an what size should try first? I have the carbs cleaned and adjusted just waiting on emgo pods to arrive.
|
|
|
Post by Blaine on Aug 16, 2012 5:09:01 GMT -6
Hey guys I may need to jet my carbs after I put pods on them where is the best place to get them online. Also what size is stock an what size should try first? I have the carbs cleaned and adjusted just waiting on emgo pods to arrive. I bought jets from a local dealer.Stock is #125 & I used 132's.You may want to buy a few different sizes to experiment with.
|
|
|
Post by aceonf4i on Aug 16, 2012 7:25:19 GMT -6
Is it as simple as replacing the main jet, or are there other adjustments inside the carbs?
|
|
|
Post by Blaine on Aug 16, 2012 8:40:39 GMT -6
Is it as simple as replacing the main jet, or are there other adjustments inside the carbs? It can be,or you may need to shim your needle or change pilot jets.It differs person to person.Some people need to do more tuning than others.
|
|
|
Post by xotox1 on Aug 19, 2012 11:15:01 GMT -6
Things to consider, are you using the stock air box and exhaust? If you plan to modify these, this will effect the bike's performance. I installed pods on the carbs and modified the stock exhaust. I installed the stage 3 kit from the site below and sync the carbs. It runs great! The only other thing I have to is adjust the floats. It runs a little rich and back fires on one side. www.6sigmaracingjetkit.com/
|
|
|
Post by aceonf4i on Aug 20, 2012 22:01:46 GMT -6
What a great site going to order a kit ASAP .thanks my friend
|
|