|
Post by bandagraph on Jul 28, 2013 11:09:14 GMT -6
If u jumped the selonoid and nothing happened...that is an indication that the starter is bad, as that is the same as connecting the starter directly to the battery. That's what I was thinking and fearing, but why wouldn't I at least have some sparks flying when jumping it?
|
|
|
Post by bandagraph on Aug 6, 2013 14:38:18 GMT -6
If u jumped the selonoid and nothing happened...that is an indication that the starter is bad, as that is the same as connecting the starter directly to the battery. That's what I was thinking and fearing, but why wouldn't I at least have some sparks flying when jumping it? You got it! Rebuilt starter and it fires right up! Thanks everyone for the help!
|
|
|
Post by to76 on Oct 24, 2015 18:32:37 GMT -6
Ignition switches can usually be found on ebay, and I can supply a wireing diagram "modification" that can be done so that a universal keyed on/off switch can be used. Could you please send me a copy? Sent from my Nexus 7 using proboards dear almighty eagle rider... im begging you for the said diagram you so graciously.mentioned. im at my wits end. My backstory of my 89 is that the horn and headlight and turn signals all dont work anymore. Ive tested the solenoid.. the starter goin across the terminals...and even the starter circuit relay with. 12 v battery like my.manual says. And it clicks.. my new solenoid i just bought doesnt click tho. Thats the weird part. However. Im confused as to why the lights all dont work now. My ignition is super worn where i can pull the key out while it runs. But i dont have the money or patience to get the actual part. Id love to just bypass it with an after market ignition if only i could get the wiring modification going. Thanks so much for ur assistance and god bless
|
|
|
Post by eaglerider on Oct 25, 2015 4:15:41 GMT -6
sending by email.
|
|
|
Post by jncashep21 on Jul 17, 2019 12:32:58 GMT -6
I know this post is older but could someone here email me the bypass diagram for the ignition switch. The bike I have someone cut the wires from the switch, the switch is 200 dollars so I'd like to rig m.j ybown setup. Reading this forum a few of you guys has a diagram to do this , thankyou!
|
|
|
Post by eaglerider on Jul 17, 2019 16:36:39 GMT -6
Just sent to your email.
|
|