|
Post by lrkellogg on Jun 7, 2013 17:40:52 GMT -6
Hi guys, so my right turn signal/running lamp bulb apparently has a short at the bulb connection. If I wiggle and push in on the bulb it will eventually light until it is bumped again.
So my question is since I like to prevent headaches....how do I carefully remove the bulb from the socket? Do I push and twist it? Also what would you recommend once I have access to the socket? Think its probably a dirty connection?
Thanks guys!
|
|
|
Post by eaglerider on Jun 7, 2013 17:45:40 GMT -6
Yep, push in and turn it....likely a bad bulb, or a cruddy socket.
|
|