|
|
Post by doncn11 on Jun 13, 2014 21:01:02 GMT -6
I just replaced the turn signals on my 85 en450. I replaced them with 2 wire on the rear and 3 wire on the front but now have no running lights on the front or rear. I traced the red wire from the rear lights up to the connector behind the head light and have no power at the connector. Any ideas would be greatly appreciated.
|
|
|
|
Post by Blaine on Jun 14, 2014 5:56:26 GMT -6
I just replaced the turn signals on my 85 en450. I replaced them with 2 wire on the rear and 3 wire on the front but now have no running lights on the front or rear. I traced the red wire from the rear lights up to the connector behind the head light and have no power at the connector. Any ideas would be greatly appreciated. You only have running lights on the front (3 wires)& flashers on the rear (2 wire)Do your flashers work??   |
|
|
|
Post by doncn11 on Jun 14, 2014 17:34:51 GMT -6
The flashers work just fine - what I'm referring to as far as running lights in the rear the brake light bulbs also act as running lights - they are dual filament bulbs and operated as running lights until I hooked up the new turn signals
|
|
|
|
Post by eaglerider on Jun 14, 2014 18:50:00 GMT -6
not running lights, you have a tail light and a brake light (all in one housing, if stock)......dual filiment bulb.
|
|
