|
Post by harhowe92 on Mar 5, 2015 16:05:04 GMT -6
I bought a solenoid connector for my 85 kawasaki 454 ltd and it has a yellow wire, a green wire, and two red wires. I was just wondering if anyone could help me figure out which wires I connect to tie it into the harness.
|
|
divot
New Member
Voices in my head>Battle of Disarm
Posts: 61
|
Post by divot on Mar 6, 2015 16:08:29 GMT -6
I bought a solenoid connector for my 85 kawasaki 454 ltd and it has a yellow wire, a green wire, and two red wires. I was just wondering if anyone could help me figure out which wires I connect to tie it into the harness. If it's the solenoid relay/switch i expect the 2 red are a thicker gauge than the green and yellow. As long as that is the case: yellow to the black(which goes to switch), green to black/yellow stripe ( goes to ground connection/end of circuit), then the 2 red wires connect to the thick black wires(one attached to battery, other attaches to starter motor). Good luck, make sure battery fully charged.
|
|