|
Post by tstang429 on Apr 10, 2015 10:47:47 GMT -6
Ok I know i may be a little critical but when comes to my wiring i get very picky. I am looking to repair a section on my bike thats been patched three times. I am goin to need a section of wire to splice in to do the repair correct. I was wondering where can i find the correct wire colors to do the repair. I know I can clean up and see whats on the bike. I am looking for a place to by wire spools of the correct so i can get it correct again. One wire has three bottom connectors on it in a 4 inch section of wire. I will be tracing and making sure that the wire is not damaged else where and current draws are not effecting it. I am also looking at some good quality loom to protect from the road. Thanks in advance for any help
|
|
|
Post by tstang429 on Apr 14, 2015 17:40:30 GMT -6
found a scrap yard with bikes. pulled off a section of wire that had my correct colors then patched it. Fired up no issues. alls good now
|
|
|
Post by scuba10jdl on Apr 22, 2015 17:10:43 GMT -6
My favorite place to get wiring is wirebarn.com I've used it to get all kinds of wiring and have redone entire harnesses from wiring supplied from there.
|
|
|
Post by tstang429 on Apr 22, 2015 23:40:11 GMT -6
cool thanks. ill look into that. I have a feeling this is only the start on this project.
|
|