|
Post by mik3 on Apr 30, 2015 10:11:56 GMT -6
Hello. So have traced out the vacuum leaks in my bike, am replacing the intake manifold tubes with high temp silicone tubes, but as far as the air box ducts to the carbs, they are unavailable. Are there any replacement aftermarket ones around? The part is: 14073-1205 DUCT,CARBURATOR
Any help on fixing them, or finding a replacement is appreciated!
|
|
|
Post by eaglerider on Apr 30, 2015 19:55:56 GMT -6
Check the 1990 -1995 Vulcan 500 parts....should possibly work. If your old ones are not torn up, should be able to use them....not as critical as the boots between carbs and engine.
|
|
|
Post by mik3 on May 1, 2015 9:47:10 GMT -6
Thank you sir. I actually ordered 2 of the emgo pods already. They are dry cracked from sitting for so long, rescued the bike from an airplane haNgar. As far as the boots from the carbs to intake, am using exhaust hose i ordered from a marine store, paid $4 for a foot of hose
|
|
|
Post by Blaine on May 1, 2015 14:15:22 GMT -6
Thank you sir. I actually ordered 2 of the emgo pods already. They are dry cracked from sitting for so long, rescued the bike from an airplane haNgar. As far as the boots from the carbs to intake, am using exhaust hose i ordered from a marine store, paid $4 for a foot of hose You can still order the intake boots from the dealer.They are less than $20.00 each.I also had pods so I had no need for the airbox ones.
|
|
|
Post by mik3 on May 2, 2015 12:28:17 GMT -6
Very shameful for me to admit, but i actually didnt have the carbs snapped all the way in.
|
|
|
Post by mik3 on May 2, 2015 17:40:14 GMT -6
After removing the airbox, on the lower portion of it there was a small hose hooked to a can. Is this another portion that I need to cap off, or remove when I move to the emgo pods? Thanks!
|
|
|
Post by Blaine on May 2, 2015 17:56:17 GMT -6
After removing the airbox, on the lower portion of it there was a small hose hooked to a can. Is this another portion that I need to cap off, or remove when I move to the emgo pods? Thanks! I you mean the engine breather behind the starter. It needs a filter installed on it.There are plenty of pics of it on here.
|
|