|
Post by con1 on Feb 6, 2016 8:31:54 GMT -6
hallo everybody i m new to the forum and new to the ltds ! so guess what my first question is about? carbs of course but its easy for most . i just got mine 2 weeks ago and refurbishing since then i think i have the original petcock with the vacuum niple which was connected to one of the carbs. the other carb also had a nipple for a hoose but was blocked. so i T ed together the two nipples from the carbs and connect the hoose to the vacuum -petcock since then then i runs better ! so is what i did correct?
|
|
|
Post by eaglerider on Feb 6, 2016 15:46:22 GMT -6
Yep! You did good!
|
|
|
Post by Blaine on Feb 6, 2016 16:28:57 GMT -6
hallo everybody i m new to the forum and new to the ltds ! so guess what my first question is about? carbs of course but its easy for most . i just got mine 2 weeks ago and refurbishing since then i think i have the original petcock with the vacuum niple which was connected to one of the carbs. the other carb also had a nipple for a hoose but was blocked. so i T ed together the two nipples from the carbs and connect the hoose to the vacuum -petcock since then then i runs better ! so is what i did correct? Either way is correct.....You likely had a slight vacuum leak that you fixed when you "T" them.
|
|
|
Post by con1 on Feb 7, 2016 2:56:12 GMT -6
thanks alot admins ! i m really happy with the outcome .motor starts with the firrst turn now
|
|
gonzo
Junior Member
For the 1st time ever I don't like the snow
Posts: 215
|
Post by gonzo on Feb 12, 2016 22:40:24 GMT -6
I've got a cap on the right carb vacuum port. Is that correct? Or should I put a T connector on it?
|
|
|
Post by Blaine on Feb 13, 2016 5:08:39 GMT -6
I've got a cap on the right carb vacuum port. Is that correct? Or should I put a T connector on it? Either is correct. (See above post)
|
|