|
|
Post by cruiserguy on Apr 9, 2016 14:56:12 GMT -6
![]()  </a>'>I dint mark were the coil wires went to each coil ,i no which ones are positive+ and neg ect does it matter what set of the 2 wires go to each coil will it affect the firing order please need help. its for my 1989 454 ltd does any one have photos of theres would help also |
|
|
|
Post by eaglerider on Apr 10, 2016 4:55:04 GMT -6
Yes. there is a left and right side coil wiring. This has been covered somewhere in the general board, and which color wire goes where.....I don't remember which.
|
|
|
|
Post by cruiserguy on Apr 10, 2016 9:17:33 GMT -6
hi there thank you I will try looking in that area would you happen to have a photo of just one side of coil ,with the wires all ready hooked up then I would really no
|
|
|
|
Post by knoizy on Apr 10, 2016 17:29:42 GMT -6
I have the manual in front of me but not the bike -
Ignition Coil Removal/install notes
Black and Yellow/Red Wire - No.1 ignition coil
Green and Yellow/Red Wire - No.2 ignition coil
The pistons and cylinders have No. 1 as left side when sat on the bike but if you wait a day I'll check the bike and confirm.
|
|
|
|
Post by cruiserguy on Apr 10, 2016 20:52:14 GMT -6
that's great thank you if you can check your bike would be great and does any one have a pic of the coil on there bike i could look at
|
|
|
|
Post by knoizy on Apr 15, 2016 14:17:53 GMT -6
OK, sat on my bike
LEFT - Green, Red/Yellow
RIGHT - Black, Red/Yellow
|
|
|
|
Post by cruiserguy on Apr 15, 2016 18:58:09 GMT -6
that great thank you very much, when you lose track of were wires go can be tuff this is a great site for us 454 riders
|
|
|
|
Post by cruiserguy on Jun 10, 2016 22:12:36 GMT -6
what is the proper wiring for the coils? I've seen 2 different ways on here what really is the right way different color wires confusing me
|
|
