|
Post by dageler on Nov 7, 2016 7:19:14 GMT -6
I am bobbing out my 86 and I want to eliminate some of the mess on top. What are other people doing to clean that area of the bike up. I am going to relocate the key switch and most likely drop down to a single speedo with indicators built in. What are my options for the tach? I want to remove the tach but I am unsure how to cap the top of the case where the cable runs. Any ideas would be great; I am a pretty handy guy so welding, grinding, cutting are not outside of my wheel house.
Thanks in advance, Dageler
|
|
|
Post by lj86454 on Jun 24, 2018 14:19:23 GMT -6
My tachometer broke so I removed the gage and cable the connection is just open and I’ve had absolutely no problems with it
|
|
|
Post by actionverb on Aug 7, 2018 20:06:37 GMT -6
Capped mine with a little waterproof hearshrink tubing and couple small zip ties. Just wish I'd taken the shaft out when I did my valve adjustment. Next time.
I replaced my speedo too, but still use the rest of of the cluster
|
|