|
|
Post by jameshotjr on Nov 15, 2016 12:42:58 GMT -6
I'm trying to measure my float height I must not be doing something right I keep seeing 17mm on the threads I'm nowhere close. Am I measuring wrong this ruler has mm on it so I'm lost
|
|
|
|
Post by jameshotjr on Nov 15, 2016 12:46:04 GMT -6
Also IDK how to add this pic but with float side up I measured up from the gasket at the slide side to what would be the bottom of the float with needles in seated position and I'm only around 10mm
|
|
|
|
Post by jameshotjr on Nov 15, 2016 13:30:14 GMT -6
|
|
|
|
Post by Blaine on Nov 15, 2016 18:01:26 GMT -6
|
|
|
|
Post by jameshotjr on Nov 16, 2016 9:52:51 GMT -6
I have no idea what happened I went and got some pinesol and was gonna put em in the heated ultrasonic cleaner I fired up the bike to pull up by the porch and the SOB fired and ran perfect so I got some gas and rode for about 40 minutes and it runs fine I didn't change anything hopefully it's OK now time will tell.
|
|
