pya977
Junior Member
Posts: 300
|
Post by pya977 on Apr 3, 2018 12:59:10 GMT -6
ive just had a new after market petcock delivered which is for the en450, but there is only one exit pipe not two as the oiginal, question is can i use it and if so do i just blank off the smaller rubber pipe that goes to the carbs
|
|
|
|
Post by Blaine on Apr 3, 2018 14:29:23 GMT -6
Yes just block off the vacuum line.....You will have to remember to shut the petcock off every time you shut the bike off or risk flooding the engine with raw fuel....Thats what the vacuum does....shuts the flow off when you shut the bike off.
|
|
pya977
Junior Member
Posts: 300
|
Post by pya977 on Apr 4, 2018 9:11:04 GMT -6
thanks blaine
|
|
|
|
Post by dirtyrider on Apr 12, 2018 17:08:27 GMT -6
|
|
|
|
Post by Blaine on Apr 14, 2018 4:24:43 GMT -6
If bike runs & rides without starving for fuel you ill be fine....
|
|
|
|
Post by dirtyrider on Apr 19, 2018 16:35:35 GMT -6
Well it seems after a valve adjustment and carb tuning the stutter is still there, mostly noticeable in low to mid rpm. My exhaust is leaking from the crosspipe, could that cause stutter?
|
|
|
|
Post by Blaine on Apr 20, 2018 5:49:42 GMT -6
Well it seems after a valve adjustment and carb tuning the stutter is still there, mostly noticeable in low to mid rpm. My exhaust is leaking from the crosspipe, could that cause stutter? Yep possable but not likely. |
|
