|
|
Post by timetraveler2540 on Apr 17, 2018 20:25:48 GMT -6
Hey guys, this is my first time posting on here and really any forum for that matter so hopefully on doing this right and correct me if I'm not. First , thank you to all the info and great ideas on this site. So I'm about to Bob out my 86 and ordered some Krator heavy duty turn signals. Before I started was just curious to see if they would work. Their 12v and thought they should. I just threw the connectors in the sleeve and when I turn signal on they just stay on and don't blink, is this due to poor connection, do I connect they right for it to work? Just assumed if they where touching it's good enough. Thanks in advance for any thoughts. Cheers
|
|
|
|
Post by Blaine on Apr 18, 2018 5:54:25 GMT -6
Hey guys, this is my first time posting on here and really any forum for that matter so hopefully on doing this right and correct me if I'm not. First , thank you to all the info and great ideas on this site. So I'm about to Bob out my 86 and ordered some Krator heavy duty turn signals. Before I started was just curious to see if they would work. Their 12v and thought they should. I just threw the connectors in the sleeve and when I turn signal on they just stay on and don't blink, is this due to poor connection, do I connect they right for it to work? Just assumed if they where touching it's good enough. Thanks in advance for any thoughts. Cheers If your using them on the front remember there are 3 wires.....running light,flasher & ground..Are you hooked to blinker wire? |
|
|
|
Post by timetraveler2540 on Apr 18, 2018 15:07:18 GMT -6
Back turn signals, and I definitely am hooked to the right wires, if I hook the new light up with the old turn signal still hooked up( ie new and old connected all together,) they blink. So frustrating, I'm lost.
|
|
|
|
Post by timetraveler2540 on Apr 18, 2018 16:25:21 GMT -6
So I've been told because they are smaller bulbs I'll need a relay on each blinker. Found a great Kawasaki guy. Thanks for responding
|
|
|
|
Post by Blaine on Apr 19, 2018 5:54:28 GMT -6
So I've been told because they are smaller bulbs I'll need a relay on each blinker. Found a great Kawasaki guy. Thanks for responding Or use a electronic flasher. |
|
|
|
Post by eaglerider on Apr 19, 2018 5:54:36 GMT -6
If those lights are LED, you need to change the flasher unit (which is mechanical) to an electronic replacement...those are available at most any auto parts store.
|
|
|
|
Post by timetraveler2540 on Apr 22, 2018 19:20:59 GMT -6
Thank you blain
|
|
