|
Post by jaywayne91 on Jun 15, 2018 0:30:58 GMT -6
Hey folks I got this bike few weeks ago and the issues I'm having has got me lost I've bypassed all safetys and to get it to crank over I crossover the sylinoid and it will crank but no spark neutral light is on getting power to the coils but no spark. I've checked over wiring wires are good fuses ect. New plugs fresh oil ect ect. I'm at a loss and what parts are compatible with this bike. And where I live there's only one place that has parts bikes and its 2hrs away please any knowledge to get this bike on the road thanks in advance
|
|
|
Post by knoizy on Jun 15, 2018 4:33:53 GMT -6
Have you checked the condition of the HT leads at the spark plug end? Sometimes the inner strands get broken and dirty and you only have to trim 1/4 inch off then re-install the socket on the end to get at some fresh copper. How about checking for a spark on the frame? Also make sure your battery is putting out a healthy 12v throughout. After that it could be the IC igniter that is notoriously difficult to repair.
|
|
|
Post by jaywayne91 on Jun 15, 2018 19:24:18 GMT -6
Yeah tried that, and several other things along with that idea nothing yet so far
|
|
|
Post by eaglerider on Jun 17, 2018 6:57:06 GMT -6
Are the coils wired correctly? Not any other bikes are comparable....Some parts on a Vulcan 500 are the same....the Vulcan 500 evolved from the 454, and the Ninja 500 is the same basic engine.
|
|
|
Post by jaywayne91 on Jun 29, 2018 3:25:12 GMT -6
Yeah everything's wired properly may just break down and buy a new wiring harness
|
|
|
Post by eaglerider on Jun 29, 2018 6:33:11 GMT -6
Unless previous owner chopped up the harness, very doubtful that is the problem.
|
|