|
Post by irishen450 on Jan 17, 2019 11:20:34 GMT -6
Hi all. Having bought new wiring loom and trying to install it running into some difficulties. Firstly. Have an extra plug from the right handle bar which I don't have the matching plug on the loom. Secondly the starter solenoid. Trying to figure where to wire it in as the previous owner had botched and spliced everything together. So the bike is an 86 and European where the loom is USA. Maybe this is the a problem Pic of the handlebar plug ibb.co/NWrkf3XPic of where I think the solenoid plugs in ibb.co/BtP2Zk8Thanks
|
|
pya977
Junior Member
Posts: 300
|
Post by pya977 on Jan 18, 2019 15:18:56 GMT -6
if its the same as the uk spec bike it will depend on the year of the wiring loom to the year of the h/bar switch as they are different for some years as i found out to my cost
|
|