|
Post by Dafske on Mar 11, 2020 6:03:53 GMT -6
Hello,
I have a problem with my cilinder and pistons. they need to be replaced. i wanted to bore to a oversize piston and rings but unfortunately the pistons a no longer available. So what i thought i want todo is order EX 500 STD pistons and rings, let the current jugs bore to the size of the pistons and vollá it works. But i did some research about the diffrences between these engines and the only diffrence i found was that the stroke is 3mm more with the EX 500 pistons.
Is its still gonna work, or is this a show stopper? i really dont see any other options here I hope you guys can help me!
Thanks again,
Cheers!
Davey Cornelissen
|
|
|
Post by travismo on Apr 18, 2020 18:26:00 GMT -6
I’d pull the plugs out and measure the distance of the top of the piston at TDC to the bottom of the spark plug hole. I’m not sure as to how much compression room there is from the valves and piston.
|
|