|
Post by nash2time on Jun 26, 2020 14:04:25 GMT -6
Hello all! I have a quick question I'm sure y'all can help me with. First, I just bought an '85 454 that's been sitting for 20 years. Just last weekend got it to run and it rode like a dream. That being said... I need mufflers. She is loud. So I recently went onto eBay and bought a singular stock muffler and heat shield for the right side (I think it is the right side). I need to find a stock one for the left. But I will attach an image of what I found and if anyone can tell me what fittings or things I may need to make sure this bad boy fits properly, I would greatly appreciate it. I am fairly new to all of this. Again, I know nothing about mufflers or exhaust so if there is any clamps, screws, gaskets, stuff inside the actual muffler that I need to get, I'll be much obliged.
|
|
|
Post by nash2time on Jun 26, 2020 14:05:49 GMT -6
For reference, this is NOT my bike but this is what the exhaust piping looks like right now.
|
|
|
Post by eaglerider on Jun 26, 2020 19:33:39 GMT -6
That is the right side, and it should slide right onto your header pipe. You will need a Clamp to clamp the muffler to the header pipe. The muffler then attaches to the frame with a bolt...when you get it in place, you will see where it all goes. Halfway there,,,now you need the left side.
|
|
|
Post by nash2time on Jun 29, 2020 8:17:00 GMT -6
That is the right side, and it should slide right onto your header pipe. You will need a Clamp to clamp the muffler to the header pipe. The muffler then attaches to the frame with a bolt...when you get it in place, you will see where it all goes. Halfway there,,,now you need the left side. Perfect. Ordered a left side with the heat shield over the weekend. I'll hopefully get them before this weekend and be able to take a small ride around the countryside for the 4th. Thanks for the help, eagle!
|
|
pya977
Junior Member
Posts: 300
|
Post by pya977 on Jun 29, 2020 9:57:38 GMT -6
between the exhaust pipe and the muffler there is a gasket that you will need the part number is 110091634 they fit quite a lot of kawasaki models and are easy to find
|
|
|
Post by nash2time on Jun 29, 2020 10:14:57 GMT -6
between the exhaust pipe and the muffler there is a gasket that you will need the part number is 110091634 they fit quite a lot of kawasaki models and are easy to find Much appreciated!
|
|