|
88 454ltd
Jan 10, 2021 17:13:14 GMT -6
via mobile
Post by traezombie on Jan 10, 2021 17:13:14 GMT -6
Hey guys, I recently got a 88 454ltd from a trade involving some subs and amp. He said the bike did run until he lost spark. Later on he admitted to jumpstarting the bike from a running truck(big nono). Whenever I got the bike the ignition switch had been hollowed out but it all lights would come but no crank no spark. So far I have buildt a new harness, while waiting on parts, only the essentials using a toggle switch to power up and a push button to start. Everything is fine all lights coming on and cranking over. So I have ordered everything from stator and pickup coils to the igniter and main coils. But my problem is finding out the right size hoses regarding the fuel, and coolant. If anyone could point me to the right ones it would be much appreciated. Also, while I was replacing the stator and pickups I ran into a problems with the screws(I grinded a slot and used an impact) but I need the size of the screws so I can replace em. Anyways thanks!
|
|
|
88 454ltd
Jan 10, 2021 17:16:53 GMT -6
via mobile
Post by traezombie on Jan 10, 2021 17:16:53 GMT -6
This bike was complete when I got it but I'm gonna run pod filters and instead of a block off plate, could I just run a hose from one side to the other? On top of the valve cover. Also I'm gonna lower it but i can't find the shocks y'all using to do it with. If anyone could point me In the right direction I'd appreciate it.
|
|