|
Post by highbergthomas on Aug 28, 2021 16:48:14 GMT -6
Ok so I have drag pipes and have rejetted, cleaned and rebuilt carbs. ran awesome for a while, ended up having to replace starter clutch, sprocket and even put new flywheel/ generator now it wont idle and the idle speed adjustment knob makes no difference either way I turn it. What do I need to do?
|
|
|
Post by knoizy on Aug 30, 2021 9:46:07 GMT -6
Idle mix and idle speed are two separate adjustments. Are you saying it will run above idle OK?
|
|
|
Post by highbergthomas on Aug 30, 2021 16:13:57 GMT -6
Ya I know the difference, in fact this bike came to me in four big boxes, so I know quite a bit about it. I'm pretty sure I know the answer to my own question really just need a second opinion. But to answer your question I'll repeat, the idle speed adjustment makes no difference regardless of which way I turn it and it wont idle unless I give it a little throttle and i dont want to just adjust the idle stop screw i want to address the actual problem. BTW it's an 88 454 ltd completely custom bobber!
|
|
|
Post by hounddog22642 on Aug 31, 2021 5:04:55 GMT -6
|
|